close

Positively innovative
Positively Innovative
We focus on genuine innovation to enable our partners
around the world to achieve real results.
Positively innovative
Positively Innovative
We focus on genuine innovation to enable our partners around the world to achieve real results.

NEWS

DAISAVE_en_top.png

Announcement

09/2024

Launch of the special website for the low GWP fluorinated liquid "DAISAVE"

DAISAVE series combines excellent thermal and chemical stability,
zero ozone depletion potential, low surface tension, low viscosity, good solubility, and the drying properties necessary for effective cleaning.
You can explore various solutions for utilizing the DAISAVE series in different scenarios.

semicon-tw-2024-banner.jpg

Exhibition

08/2024

Daikin will exhibit at SEMICON Taiwan 2024

Daikin will be exhibiting at SEMICON Taiwan, 4th - 6th September 2024. We will be introducing our innovative products and solutions for the semiconductor industry.

semicon_west_2024_banner.jpg

Exhibition

06/2024

Daikin will exhibit at SEMICON West 2024

Daikin America, Inc. will be exhibiting at SEMICON West, 9th - 11th July 2024.
We will be introducing our innovative products and solutions for the semiconductor industry.

aee-2024_banner.jpg

Exhibition

05/2024

Daikin will exhibit at Automotive Engineering Exposition 2024

Daikin Industries, Ltd. will be exhibiting at Automotive Engineering Exposition 2024 Yokohama from May 22nd to 24th, 2024.

We will be introducing our innovative solutions that will contribute to the evolution of next-generation mobility, such as eAxle, EV battery, thermal management, and AD/ADAS sensors.

banner_techtextil-2024.jpg

Exhibition

04/2024

Daikin will exhibit at Techtextil 2024

Daikin Chemical Europe GmbH will be exhibiting at Techtextil 2024 from April 23rd to 26th, 2024.
We will be introducing our UNIDYNE portfolio for textiles and nonwovens.

interbattery-2024_banner.jpg

Exhibition

03/2024

Daikin will exhibit at InterBattery 2024

Daikin Korea Co., Ltd. will be exhibiting at InterBattery, from March 6th to 8th, 2024.
We will be introducing our innovative solutions for battery materials.

semicon-kr_2024_banner.jpg

Exhibition

01/2024

Daikin will exhibit at SEMICON Korea 2024

Daikin Korea Co., Ltd. will be exhibiting at SEMICON Korea 2024 from January 31st to February 2nd, 2024.
We will be introducing our innovative products and solutions for the semiconductor industry.

nepcon2024_banner.jpg

Exhibition

01/2024

Daikin will exhibit at NEPCON JAPAN 2024

Daikin Industries, Ltd. will be exhibiting at NEPCON JAPAN 2024 (Electronic Components and Materials EXPO) from January 24th to 26th, 2024.
We will introduce products and solutions that contribute to the Information and Communication Technology, Automotive, and Semiconductor fields.

ces_banner2023.jpg

Exhibition

12/2023

Daikin will exhibit at CES 2024

Daikin America, Inc. will be exhibiting at CES 2023, from 9th through 12th January 2024.

We will be introducing our innovative solutions for the automotive, battery, 5G, semicon, and medical fields.

semiconjp2023_banner.jpg

Exhibition

11/2023

Daikin will exhibit at SEMICON Japan 2023

Daikin will be exhibiting at SEMICON Japan 2023 from December 13th to 15th, 2023.
Four companies from the Daikin Group (Daikin Industries, Daikin Finetech, Nippon Muki, and Daikin Applied Systems) will jointly exhibit, showcasing each company's materials and solutions for next-generation semiconductors all in one place.

MAGAZINE

fep-powder_banner.jpg

Product information

06/2024

Fluoropolymer FEP coating powder with excellent releasability

FEP (Fluorinated Ethylene Propylene) coating powder can easily make smooth surface without pinhole. FEP film with appropriate primer helps to demonstrate strong adhesion to metal substrate and displays excellent chemical resistance and moisture resistance, thus protects metal substrate from corrosion for a long time.

Interview
F
I

fluorinated-liquid_banner.jpg

Product information

10/2023

Fluorinated liquid
DAISAVE SS-54

DAISAVE SS-54 is an environment friendly fluorinated liquid with low global warming potential (GWP) and low toxicity. This fluorinated liquid is widely used in semiconductor, automotive and electronics manufacturing applications, etc.

Interview
F
I

hmx10_top_v2.jpg

Under development material

09/2023

High transparency and high UV resistant fluoropolymer (under development)

HMX10, a high transparency and high UV resistant polymer, is a new fluoropolymer designed from monomer using our company's proprietary fluorochemical technology. HMX10 features high transparency, excellent ultraviolet resistance, and low dielectric properties which are prominent among fluoropolymers.

Interview
F
I

repellent_top.jpg

Technical report

07/2023

Development of a non-fluorinated oil / grease resistant

Daikin is focusing on the development of non-fluorinated materials.
Using our polymerization and blending technologies, we developed XP-8001, an oil / grease resistant agent for food service wrapping paper surface treatments using only non-fluorine materials.

Interview
F
I

Fluoromaterials attracting attention in 5G

Technical report

10/2022

Fluoromaterials attracting attention in 5G

The advent of 5G is expected to greatly improve the convenience of our communications. Daikin’s fluoromaterials and technologies are gaining attention as a way to realize and popularize the 5G concept of high-speed, high-capacity, low-latency, and simultaneous multi-connections.

Interview
F
I

Technical column lithium-ion battery Vol.02

Serial column

10/2022

[Battery materials] Vol.2 Binder for lithium-ion batteries

The market trends and development movements of battery materials are featured by Takanori Suzuki, who has been engaged in the development of lithium-ion battery materials for many years and is currently a consultant for battery materials at Suzuki Material Technology and Consulting Co., Ltd. The theme of the second column of the series is “Binder for lithium-ion batteries.”

Interview
F
I

Fluoropolymer PFA for additive manufacturing

Technical report

10/2022

The new opportunity of additive manufacturing with fluoropolymer PFA

Daikin has developed a fluoropolymer PFA which is suitable for additive manufacturing, powder bed fusion method (PBF method). The fluoropolymer PFA, which is excellent in chemical and heat resistance and weatherability, is expected to be developed into semiconductors, medical applications, etc.

Interview
F
I

Technical column lithium-ion battery Vol.01

Serial column

08/2022

[Battery materials] Vol.1 Lithium-ion batteries and fluoromaterials

The market trends and development movements of battery materials are featured by Takanori Suzuki, who has been engaged in the development of lithium-ion battery materials for many years and is currently a consultant for battery materials at Suzuki Material Technology and Consulting Co., Ltd. The theme of the first column of the series is “Lithium-ion batteries and fluoromaterials.”

Interview
F
I

Fluoro Sealant

Under development material

08/2022

Chemical resistant coating and sealing material

Fluoro Sealant (under development)

Fluoro Sealant is a chemical resistant coating and sealing material, as well as an excellent water vapor barrier.  A fully cured Fluoro Sealant functional film not only is an effective water vapor barrier with excellent chemical resistance, but also is capable of withstanding high voltages.

Interview
F
I

UNIDYNE Technical Center Shanghai

Global presence

08/2022

UNIDYNE Technical Center Shanghai

The UNIDYNE Technical Center is a company based laboratory that supports technology for UNIDYNE water and oil repellents. It was established as a technical base in China, the world’s largest market for water and oil repellents used in textiles, paper, and non-woven fabrics, to accurately assess market needs and quickly respond to market needs with new product development.

Interview
F
I

Fluoroelastomer for automotive interior

Technical report

07/2022

Fluoroelastomer with different properties and its application to automotive interiors

Fluoroelastomers are increasingly expected to be applied to automotive interiors as a material that responds to changes in needs of the automotive market.

Interview
F
I

semi_top.jpg

Technical report

05/2022

SEMI 2021 presentation

Challenges in advanced contaminant management from materials science perspective

At the SEMI 2021 conference, Mr.Hiroyuki Hamada, Senior scientist, Product R&D development dep., Chemicals div., Daikin Industries, Ltd., gave a lecture on the challenges of advanced pollutant management in the production process of semiconductor device manufacturing equipment from the perspective of materials science.

Interview
F
I

piezo_top.png

Under development material

03/2022

Transparent piezoelectric film

(under development)

The new transparent piezoelectric film developed by Daikin features a unique property called ferroelectricity that converts force, strain, temperature change, and electrical energy in both directions. Additionally, because of its excellent transparency and flexibility, it is expected to become a key material for pressure-sensitive touch panels and wearable devices.

Interview
F
I

optool-webinar-top.jpg

Webinar

03/2022

OPTOOL anti-smudge coating webinar by technical expert

OPTOOL is designed to bond to surface and can act as an anti-smudge coating mitigating the transfer of fingerprints to the modified surface.

In this webinar, Daikin technical expert is going to introduce the OPTOOL family, explain the properties, performance evaluation and application methods of OPTOOL.

Interview
F
I

3dp-top.jpg

Technical report

01/2022

Fluoropolymer PFA for powder bed fusion (under development)

Since high-performance materials for additive manufacturing have been developed, Daikin is developing powders for the powder bed fusion method, one of the additive manufacturing method, using fluoropolymers, a type of super engineering plastics, as raw materials. This article presents PFA powder, suitable for this method, and the physical properties of molds.

Interview
F
I

zeffle_mz_top.JPG

Product information

11/2021

Durable coating polymer ZEFFLE MZ for infectants and sterilants of medical devices

With the increasing demand for more infection control, the disinfectant and sterilization of medical devices is becoming more powerful, and the degradation of materials used in medical devices is becoming more serious.
To solve this problem, we offer durable coating materials ZEFFLE MZ that are resistant to various disinfectants and sterilants.

Interview
F
I

gof-top.jpg

White paper

10/2021

Igniting downstream consumer demand with "Goodness of Feel" for high-touch surfaces

In this white paper, Daikin aims to describe the process by which the idea of the "Goodness of Feel" property was developed and how it can be correlated to other simple surface properties. By understanding the details of this story those familiar with hydrophobic coating technology can take advantage of this concept and utilize it to enhance the downstream value provided by their own products.

Interview
F
I

water-repellent-for-auto-top.jpg

White paper

10/2021

UV-durable, water repellent coatings for automotive applications

Daikin has created a new fluorocoating, OPTOOL UD120, based on our proprietary PFPE technology with significantly increased UV resistance while maintaining water/oil repellency and abrasion resistance properties. This advanced technology is well suited for automotive applications such as camera lenses, LIDAR modules, touch displays and windows.

 

Interview
F
I

PFA-tube-mainvisual_s.png

Technical report

09/2021

Recent progress on the measurement methodology of surface roughness inside the PFA tubes

We assume that in order to discuss the possibility of residence of nano-sized particles on the inner surface of PFA tubes for semiconductor manufacturing equipment, the method for measuring the surface roughness inside the tubes must be newly invented. This report makes a proposal for a method to measure surface roughness at the nano-level and demonstrate the necessity for this measurement.

Interview
F
I

CFRTP_top.JPG

Under development material

09/2021

Fluoropolymer / carbon fiber composite
(under development)

Daikin's new developed "Fluoropolymer / carbon fiber composite" is a type of CFRTP (Carbon Fiber Reinforced Thermo Plastic) with excellent chemical resistance.
It is also expected to be used in various applications that require structural strength, light weight, impact resistance,  water and oil repellency, slidability, and heat resistance.

Interview
F
I

SOLVING INDUSTRY CHALLENGES

Automotive

> Automotive

Semiconductor

> Semiconductor     

   manufacturing

Wire and Cable

> Wire and cable

Energy solutions

> Energy solutions

Electronics

> Electronics

Building and Construction

> Building and
    construction

Home and Living

> Home and living

Positively innovative

See all industries

fluoro-pedia-SP.jpg